| Brand Name: | IWAVE |
| Model Number: | FDM-6805UG |
| MOQ: | 2units |
| Price: | Negotiable |
| Delivery Time: | 5-8work days |
| Payment Terms: | L/C,D/P,T/T |
FDM-6805UG is a wireless transmission product designed by IWAVE based on mature SOC chipset, 2watts power, 2X2 MIMO.
Provide wireless communication link of HD video, data and serial control data based on IP. FDM-6805UG is designed based on CA (Carrier Aggregation), MIMO technologies. It doesn't rely on any carrier's base station.
This digital data link provides a robust and secure link in the 600 MHz and 1.4G frequency band Supports Ethernet and full duplex telemetry data transmission.
Anti-jamming: It adopts the Automatic frequency hopping technology (FHSS) and adaptive modulation for anti-interference. Builds a point to point and point to multiple point network with 8nodes.
| GENERAL | WIRELESS | |||
|---|---|---|---|---|
| Technology | Wireless based on TD-LTE Technology Standards | Communication | 1T1R 1T2R 2T2R |
|
| Video Transmission | 1080p HD video transmission, H.264/H.265 adaptive | IP Data transmission | Supports data transmission based on IP packets | |
| Eencryption | ZUC/SNOW3G/AES(128) Optional Layer-2 | Data Link | Full duplex communication | |
| Data Rate | Max 100Mbps(Uplink and Downlink) | Up & Down Ratio | 2D3U/3D2U/4D1U/1D4U | |
| Range | UGV: 5-10KM Ground to ground(LOS) UGV: 1-3KM Ground to ground(NLOS) |
Automatic Reconstruction Chain | Automatic link re-establishment after link failure/ re-deploy the network after a link failure | |
| Capacity | 8nodes | SENSITIVITY | ||
| MIMO | 2x2 MIMO | 1.4GHZ | 20MHZ | -102dBm |
| Transmitting Power | 5watts | 10MHZ | -100dBm | |
| Latency | Air interface delay<30ms | 5MHZ | -96dBm | |
| Modulation | QPSK, 16QAM, 64QAM | 600MHZ | 20MHZ | -102dBm |
| Anti-Jamming | Frequency Hopping and Adaptive Modulation | 10MHZ | -100dBm | |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | 5MHZ | -96dBm | |
| Power Consumption | 30Watts | FREQUENCY OPTION | ||
| Power Input | DC24V-DC27V | 1.4Ghz | 1420Mhz-1530MHz | |
| Dimension | 86*120*24.2mm | 600Mhz | 634Mhz-674Mhz | |
| MECHANICAL | ||
|---|---|---|
| Working Temperture | -20℃~+55℃ | |
| Dimension | 130*100*25mm(Antenna Not Included) | |
| Weight | 273g | |
| INTERFACES | ||
| RF | 2 x SMA | |
| ETHERNET | 1xEthernet | |
| COMUART | 3xSerial Port | 1. DEBUG Serial Port 2. Base Serial Port (only support TCP/UDP) 3. Extend Serial Port |
| POWER | 1xDC INPUT | DC24V-27V |
| Command Interface | AT command configuration | API/HTTP/UART for AT command configuration |
| Configuration Management | Support configuration via WEBUI, API, and management software | |
| Working Mode | TCP server mode TCP client mode UDP mode UDP multicast MQTT Modbus |
lWhen set as a TCP server, the serial port server waits for computer connection. lWhen set as a TCP client, the serial port server actively initiates a connection to the network server specified by the destination IP. lTCP server, TCP client, UDP, UDP multicast, TCP server/client coexistence, MQTT |
| Baud rate | 1200, 2400, 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 76800, 115200, 230400, 460800 | |
| Protocol | ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS, MQTT, Modbus TCP, DLT/645, Pass-through mode | |
| System Management | Supports WATCHDOG function, all system-level exceptions can be identified and automatically reset | |