| Brand Name: | IWAVE |
| Model Number: | FD-7821UG |
| MOQ: | 2 |
| Price: | Negotiable |
| Delivery Time: | 5-10days |
| Payment Terms: | T/T |
The FD-7821UG is an advanced wireless communication solution developed by IWAVE, designed to provide reliable IP transparent transmission for a variety of upper-layer applications, including video streaming, data transfer, and voice communication. This versatile device adopts a MESH networking mode, enabling dynamic routing, multi-hop relay, and seamless connectivity in complex environments.
| GENERAL | WIRELESS | |||
|---|---|---|---|---|
| Technology | Wireless based on TD-LTE Technology Standards | Communication | 1T1R 1T2R 2T2R |
|
| Video Transmission | 1080p HD video transmission, H.264/H.265 adaptive | IP Data transmission | Supports data transmission based on IP packets | |
| Eencryption | ZUC/SNOW3G/AES(128) Optional Layer-2 | Data Link | Full duplex communication | |
| Data Rate | Max 100Mbps(Uplink and Downlink) | Up & Down Ratio | 2D3U/3D2U/4D1U/1D4U | |
| Range | UGV: 5-10KM Ground to ground(LOS) UGV: 1-3KM Ground to ground(NLOS) |
Automatic Reconstruction Chain | Automatic link re-establishment after link failure/ re-deploy the network after a link failure | |
| Capacity | 8 nodes | SENSITIVITY | ||
| MIMO | 2x2 MIMO | 1.4GHZ | 20MHZ | -102dBm |
| Transmitting Power | 2watts | 10MHZ | -100dBm | |
| Latency | Air interface delay<30ms | 5MHZ | -96dBm | |
| Modulation | QPSK, 16QAM, 64QAM | 600MHZ | 20MHZ | -102dBm |
| Anti-Jamming | Frequency Hopping and Adaptive Modulation | 10MHZ | -100dBm | |
| Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | 5MHZ | -96dBm | |
| Power Consumption | 30Watts | FREQUENCY OPTION | ||
| Power Input | DC24V-DC27V | 1.4Ghz | 1420Mhz-1530MHz | |
| Dimension | 86*120*24.2mm | 600Mhz | 566Mhz-678Mhz | |
| MECHANICAL | ||
|---|---|---|
| Working Temperture | -20℃~+55℃ | |
| Dimension | 130*100*25mm(Antenna Not Included) | |
| Weight | 273g | |
| INTERFACES | ||
| RF | 2 x SMA | |
| ETHERNET | 1xEthernet | |
| COMUART | 3xSerial Port | 1. DEBUG Serial Port 2. Base Serial Port (only support TCP/UDP) 3. Extend Serial Port |
| POWER | 1xDC INPUT | DC24V-27V |