| Brand Name: | IWAVE |
| Model Number: | FDM-6680 |
| MOQ: | 2units |
| Price: | Negotiable |
| Delivery Time: | 5-8work days |
| Payment Terms: | L/C,D/P,T/T |
Model: FDM-6680
120Mbps Wireless Video Communication Data Link For Unmanned System
The FDM-6680 is a 120Mbps Wireless Video Communication Data Link For Unmanned System designed for UGVs, drones, UAVs, USVs, and other robotic platforms. It offers a high-performance wireless link capable of 8k video streaming, LAN, two-way serial data, and sensor data transmission. The system supports full-duplex broadband communication with error correction and achieves 120 Mbps communication speeds in both uplink and downlink.
Key Features
Scalable Node Configuration:
One master node can support up to 8 sub-nodes, sharing a total bandwidth of 120 Mbps for video and data transmission.
Communication Standards:
Based on the TD-LTE wireless communication standard, incorporating OFDM (Orthogonal Frequency-Division Multiplexing) and MIMO (Multiple Input Multiple Output) technologies.
Operates independently of any carrier's base station, ensuring flexibility and reliability.
Data Transmission Capabilities:
Supports Ethernet and full duplex TTL (Transistor-Transistor Logic) data transmission.
Prioritizes control data transmission over network signal transmission to enhance responsiveness.
Anti-Interference Technology:
Utilizes automatic frequency hopping technology to mitigate interference, significantly reducing overall system power consumption and the size of the module.
Applications
The FDM-6800 is particularly well-suited for micro and small platforms that are sensitive to size, weight, and power (SWaP), including:
Drones: For aerial surveillance and data collection.
Unmanned Aerial Vehicles (UAVs): Facilitating communication in defense and commercial applications.
Unmanned Ground Vehicles (UGVs): Enhancing remote operations in hazardous conditions.
Unmanned Surface Vehicles (USVs): Supporting maritime operations and data transmission.
Robotics: Enabling communication in various robotic applications.
Specification
| GENERAL | ||
| TECHNOLOGY | Wireless based on TD-LTE Technology Standards | |
| ENCRYPTION | ZUC/SNOW3G/AES(128) Optional Layer-2 | |
| DATA RATE | Max 120Mbps(Uplink and Downlink) | |
| RANGE | 10km-15km(Air to ground)500m-3km(NLOS Ground to ground) | |
| CAPACITY | Point to 8-Point | |
| MIMO | 2x2 MIMO | |
| POWER | 23dBm±2 (2w or 10w on request) | |
| LATENCY | End to end≤20ms-50ms | |
| MODULATION | QPSK, 16QAM, 64QAM | |
| ANTI-JAM | Automatically Cross-Band frequency hopping | |
| BANDWIDTH | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz | |
| POWER CONSUMPTION | 5Watts | |
| POWER INPUT | DC12V | |
| WIRELESS | ||
| COMMUNICATION | Communication between any 2 slave nodes must be forwarded through the master node |
|
| MASTER NODE | Any node in the network can be configured as the master node. | |
| SLAVE NODE | All nodes support unicast, multicast, and broadcast | |
| ACCESS | Multiple slave nodes can access the network simultaneously. | |
| 1.4GHZ | 20MHZ | -102dBm |
| 10MHZ | -100dBm | |
| 5MHZ | -96dBm | |
| 600MHZ | 20MHZ | -102dBm |
| 10MHZ | -100dBm | |
| 5MHZ | -96dBm | |
| FREQUENCY BAND | ||
| 1.4Ghz | 1420Mhz-1530MHz | |
| 600Mhz | 566Mhz-678Mhz | |
| MECHANICAL | ||
| TEMPERATURE | -40℃~+80℃ | |
| WEIGHT | 60grams | |
|
INTERFACES |
||
| RF | 2 x SMA | |
| ETHERNET | 2xEthernet | POE |
| Ethernet port for data(4Pin) | ||
| COMUART | 1xCOMUART | RS232 3.3V level, 1 start bit, 8 data bits, 1 stop bit , no parity check |
| Baud Rate: 115200bps(Default) (57600, 38400, 19200, 9600 configurable) |
||
| POWER | 1xDC INPUT | DC12V |
| USB | 1xUSB | |