| Brand Name: | IWAVE |
| Model Number: | FDM-66MN |
| MOQ: | 2pcs |
| Price: | Negotiable |
| Delivery Time: | 5-8work days |
| Payment Terms: | D/P,T/T,L/C |
Secure Wireless UGV/Drone Data Links for NLOS Communications
Introduction
FDM-66MN is the most advanced broadband digital data link designed for mobile robotics and unmanned systems. It provides a secure wireless link in triple frequency 800Mhz/1.4Ghz/2.4Ghz management software selectable.
FDM-66MN provides a long-range and high-throughput wireless video and telemetry communications between one or more mobile units and a control station in off-grid and disconnected environments.
Key Features
High Data Rate
●Uplink and downlink 30Mbps
Long Communication Distance
● -Line of Sight (NLOS) and mobile environments: 500meters-3km
● Air to ground line of sight: 10-15km
● Extend the communication distance via adding power amplifier
●External RF amplifiers support (provision for manual)
High Security
●Using proprietary waveforms in addition to AES 128 encryption
Easy Integration
● With standard interfaces and protocols
● 3*Ethernet port for connecting external IP devices
● OEM module for easy integration into various platform, and a standalone connectivity solution.
API Document Provided
●FDM-66MN provides API for compatible with different operating systems and platforms
Low Latency
●Slave node - master node transmission delay <=30ms
Unrivaled Sensitivity
● -103dbm/10MHz
Interface Definition
| J30JZ Definition: | ||||||
| Pin | Name | Pin | Name | Name | Pin | |
| 1 | TX0+ | 10 | D+ | 19 | COM_RX | |
| 2 | TX0- | 11 | D- | 20 | UART0_TX | |
| 3 | GND | 12 | GND | 21 | UART0_RX | |
| 4 | TX4- | 13 | DC VIN | 22 | BOOT | |
| 5 | TX4+ | 14 | RX0+ | 23 | VBAT | |
| 6 | RX4- | 15 | RX0- | 24 | GND | |
| 7 | RX4+ | 16 | RS232_TX | 25 | DC VIN | |
| 8 | GND | 17 | RS232_RX | |||
| 9 | VBUS | 18 | COM_TX | |||
Application
The miniature, lightweight and software-defined radio link module is a reliable communication partner for unmanned applications for Unmanned BVLoS missions, UGV, Robotics, UAS and USV. The high speed, long range capabilities of FDM-66MN allow simultaneous high quality duplex transmission of multiple full HD video feed and control and telemetry data. With external power amplifer, it can provides a 50km long rang communication. Even work in crowded city non-line-of-sight environment, it can also ensure more 20km communication distance.
Specification
| GENERAL | ||
| Technology | Wireless base on TD-LTE Wireless technology standard | |
| Encryption | ZUC/SNOW3G/AES(128/256) OptionalLayer-2 | |
| Data Rate | 30Mbps(Uplink and Downlink) | |
| Adaptive average distribution of system data rate | ||
| Support users to set speed limit | ||
| Range | 10km-15km(Air to ground) 500m-3km(NLOS Ground to ground) |
|
| Capacity | 16nodes | |
| Bandwidth | 1.4MHz/3MHz/5MHz/10MHz/20MHz | |
| Power | 25dBm±2 (2w or 10w on request) All nodes automatically adjust the transmitting power |
|
| Modulation | QPSK, 16QAM, 64QAM | |
| Anti-Jamming | Automatically Cross-Band frequency hopping | |
| Power Consumption | Average: 4-4.5Watts Max: 8Watts |
|
| Power Input | DC5V-32V | |
| Receiver Sensitivity | Sensitivity(BLER≤3%) | ||||
| 2.4GHZ | 20MHZ | -99dBm | 1.4Ghz | 10MHz | -91dBm(10Mbps) |
| 10MHZ | -103dBm | 10MHz | -96dBm(5Mbps) | ||
| 5MHZ | -104dBm | 5MHz | -82dBm(10Mbps) | ||
| 3MHZ | -106dBm | 5MHz | -91dBm(5Mbps) | ||
| 1.4GHZ | 20MHZ | -100dBm | 3MHz | -86dBm(5Mbps) | |
| 10MHZ | -103dBm | 3MHz | -97dBm(2Mbps) | ||
| 5MHZ | -104dBm | 2MHz | -84dBm(2Mbps) | ||
| 3MHZ | -106dBm | 800Mhz | 10MHz | -91dBm(10Mbps) | |
| 800MHZ | 20MHZ | -100dBm | 10MHz | -97dBm(5Mbps) | |
| 10MHZ | -103dBm | 5MHz | -84dBm(10Mbps) | ||
| 5MHZ | -104dBm | 5MHz | -94dBm(5Mbps) | ||
| 3MHZ | -106dBm | 3MHz | -87dBm(5Mbps) | ||
| 3MHz | -98dBm(2Mbps) | ||||
| 2MHz | -84dBm(2Mbps) | ||||
| FREQUENCY BAND | |||||||
| 1.4Ghz | 1427.9-1447.9MHz | ||||||
| 800Mhz | 806-826MHz | ||||||
| 2.4Ghz | 2401.5-2481.5 MHz | ||||||
| Communication Mode | Unicast, multicast, broadcast | ||||||
| Transmission Mode | Full Duplex | ||||||
| Networking Mode | Dynamic Routing | Automatically updat routes based on real-time link conditions | |||||
| Network Control | State Monitoring | Connection status /rsrp/ snr/distance/ uplink and downlink throughput | |||||
| System Management | WATCHDOG: all system-level exceptions can be identified, automatic reset | ||||||
| Re-transmission | L1 | Determine whether to retransmit based on the different data being carried. (AM/UM); HARQ retransmits | |||||
| L2 | HARQ retransmits | ||||||
| RF | 2 x IPX | |
| Ethernet | 3xEthernet | |
| Serial Port | 2x RS232 | |
| Power Input | 2*Power Input(alternative) | |
| CONTROL DATA TRANSMISSION | |||||
| Command Interface | AT command configuration | Support VCOM port/UART and other ports for AT command configuration | |||
| Configuration Management | Support configuration via WEBUI, API, and software | ||||
| Working Mode | TCP server mode TCP client mode UDP mode UDP multicast MQTT Modbus |
●When set as a TCP server, the serial port server waits for computer connection. ●When set as a TCP client, the serial port server actively initiates a connection to the network server specified by the destination IP. ●TCP server, TCP client, UDP, UDP multicast, TCP server/client coexistence, MQTT |
|||
| Baud Rate | 1200, 2400, 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 76800, 115200, 230400, 460800 | ||||
| Transmission Mode | Pass-through mode | ||||
| Protocol | ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS, MQTT, Modbus TCP, DLT/645 | ||||
| MECHANICAL | ||
| Temperature | -40℃~+80℃ | |
| Weight | 26grams | |
| Dimension | 60*55*5.7mm | |
| Stability | MTBF≥10000hr | |
![]()