120Mbps Wireless Video Communication Data Link For Unmanned System
Networking:
Star Networking,Point To Point,Point To Multiple Points
Transmission Data:
120Mbps Max.
Nodes:
64nodes
Power:
23dBm±2 (2w Or 10w On Request)
Distance:
10-15km
Latency:
End To End≤20ms-50ms
Modulation:
QPSK, 16QAM, 64QAM
Packaging Details:
Standard Carton Box
Supply Ability:
500000/month
Highlight:
Wireless Video Communication Data Link
,
120Mbps Video Communication Data Link
,
Unmanned Data Communication Link
Product Description
Model: FDM-6680
120Mbps Wireless Video Communication Data Link For Unmanned System
The FDM-6680 is a 120Mbps Wireless Video Communication Data Link For Unmanned System designed for UGVs, drones, UAVs, USVs, and other robotic platforms. It offers a high-performance wireless link capable of 8k video streaming, LAN, two-way serial data, and sensor data transmission. The system supports full-duplex broadband communication with error correction and achieves 120 Mbps communication speeds in both uplink and downlink.
Key Features:
Scalable Node Configuration:
One master node can support up to 64 sub-nodes, sharing a total bandwidth of 120 Mbps for video and data transmission.
Communication Standards:
Based on the TD-LTE wireless communication standard, incorporating OFDM (Orthogonal Frequency-Division Multiplexing) and MIMO (Multiple Input Multiple Output) technologies.
Operates independently of any carrier's base station, ensuring flexibility and reliability.
Data Transmission Capabilities:
Supports Ethernet and full duplex TTL (Transistor-Transistor Logic) data transmission.
Prioritizes control data transmission over network signal transmission to enhance responsiveness.
Anti-Interference Technology:
Utilizes automatic frequency hopping technology to mitigate interference, significantly reducing overall system power consumption and the size of the module.
Applications:
The FDM-6800 is particularly well-suited for micro and small platforms that are sensitive to size, weight, and power (SWaP), including:
Drones: For aerial surveillance and data collection.
Unmanned Aerial Vehicles (UAVs): Facilitating communication in defense and commercial applications.
Unmanned Ground Vehicles (UGVs): Enhancing remote operations in hazardous conditions.
Unmanned Surface Vehicles (USVs): Supporting maritime operations and data transmission.
Robotics: Enabling communication in various robotic applications.
Specification
GENERAL
TECHNOLOGY
Wireless based on TD-LTE Technology Standards
ENCRYPTION
ZUC/SNOW3G/AES(128) Optional Layer-2
DATA RATE
Max 120Mbps(Uplink and Downlink)
RANGE
10km-15km(Air to ground)500m-3km(NLOS Ground to ground)
CAPACITY
Point to 64-Point
MIMO
2x2 MIMO
POWER
23dBm±2 (2w or 10w on request)
LATENCY
End to end≤20ms-50ms
MODULATION
QPSK, 16QAM, 64QAM
ANTI-JAM
Automatically Cross-Band frequency hopping
BANDWIDTH
1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz
POWER CONSUMPTION
5Watts
POWER INPUT
DC12V
WIRELESS
COMMUNICATION
Communication between any 2 slave nodes must be forwarded
through the master node
MASTER NODE
Any node in the network can be configured as the master node.
SLAVE NODE
All nodes support unicast, multicast, and broadcast
ACCESS
Multiple slave nodes can access the network simultaneously.
1.4GHZ
20MHZ
-102dBm
10MHZ
-100dBm
5MHZ
-96dBm
600MHZ
20MHZ
-102dBm
10MHZ
-100dBm
5MHZ
-96dBm
FREQUENCY BAND
1.4Ghz
1420Mhz-1530MHz
600Mhz
566Mhz-678Mhz
MECHANICAL
TEMPERATURE
-40℃~+80℃
WEIGHT
60grams
INTERFACES
RF
2 x SMA
ETHERNET
2xEthernet
POE
Ethernet port for data(4Pin)
COMUART
1xCOMUART
RS232 3.3V level, 1 start bit, 8 data bits, 1 stop bit , no
parity check